Transform your home’s entire aesthetic with an effortless, budget-friendly upgrade. Swapping your entry door’s glass insert is a simple DIY project that delivers an elegant refresh to your curb appeal and instantly elevates your home’s value.
Want a dramatic home makeover without the drama? Swap out your front door’s glass insert. This easy, affordable DIY project delivers a powerful boost to your curb appeal and your home’s value—all with one simple update.
Upgrade your door with a durable, ready-to-install lite kit. Each complete set includes tempered safety glass and a maintenance-free frame, along with all necessary screws and plugs. The exterior frame features a pre-applied dry glaze for a seamless, weather-tight seal.
Available Sizes:
- Width: 30″, 32″, 34″, 36″ (tolerance of ±0.75″)
- Height: 6’8″ or 7’0″ (tolerance of ±0.75″)
- Thickness: 1.75″
Easy Installation:
Designed for a straightforward replacement of existing glass inserts, this project requires only basic tools and safety equipment. We highly recommend having a second person assist you.
Find detailed instructions here: rslinc.com/technical/installation-instructions/
Finishing Options:
The maintenance-free frames are ready to use as-is and will not fade. If you wish to paint, use a primer and paint formulated for plastics. For a stained look, apply a primer followed by gel stains and two coats of clear polyurethane. Do not use paint thinners or alcohol-based chemicals.
Full guide: rslinc.com/technical/painting-and-staining/
Warranty & Important Notes:
Your purchase is backed by a reliable 20-year warranty. Please note that damage from improper installation, accidents, or failure to vent a storm door (which can cause heat damage) is not covered. Decorative grids are mounted externally on the frame.
Please remember to double-check your measurements before ordering.
RSL 22 x 36 Clear Glass Door Insert in white, offering a modern or contemporary style for entry doors. Crafted from durable glass with safety tempered insulation, this unit weighs 25 pounds and requires no assembly. Dimensions are 1.75 x 37.75 x 23.75 inches.
Included components: 1/2″ insulated glass, frame, screws, and plugs.
For best results, note the following:
- Transport blinds in the raised position if applicable.
- Decorative glass is handcrafted, so bubbles and pattern variations are unique artistic features, not defects.
- During installation, avoid over-tightening screws (maximum torque: 18-20 inch/lbs for IM, 10-12 inch/lbs for Vinyl, 8-10 inch/lbs for HI). Detailed instructions are available at RSL installation guide.
- Do not use paint thinners or alcohol-based chemicals. When painting or staining vinyl frames a dark color, use heat-reflective paints such as Aqua SurTech D200. More guidance at RSL painting guide.
- If a storm door is installed, venting is essential to prevent heat damage.
This product includes a 20-year warranty on the frame and glass. Warranty resolutions must be processed through RSL distributors; please contact your place of purchase. Exclusions apply for defects due to accidents, improper installation, or circumstances beyond RSL’s control. To maintain frame integrity, light colors are recommended over dark, and storm doors must be vented to avoid warranty voidance.
