troubleshooting your pc

Noobs Guide To Troubleshooting Your PC

Noobs’ guide to troubleshooting your PC. The majority of PC users these days have limited technical knowledge to tweak their PCs and enhance its performance. The knowledge on basic troubleshooting your PC is important in order to deal with common problems that users often encounter on their computer without having to call in a professional. In the long run, your ability to perform basic troubleshooting is vital in ensuring that you can save money.

Even basic problems such as loss of sound or light, it can be a major horror even for novice PC builders. It starts by educating yourself about how the PC works in order for you to diagnose any problem when they arise.

In case a problem happen, you need to re-boot your system. This is the most basic step you can do to determine if it is a minor lag or you need to do something else to restore it. Start by pressing the Power button. Check the motherboard to see if it is processing information correctly. There is a built in software in your CPU known as BIOS that is responsible for processing that information. Look into the basic components of your PC, such as the video card, RAM, and the CPU to make sure that everything is functioning as usual.

The PC will bleep one time during the start up process and it is a good indicator as it means the system has passed all initial test performed during the booting process. However, a series of bleeps could indicate that something is wrong with your system. In case the first condition applies, the initial processing of the BIOS will continue on until the information is displayed on the screen. If there are errors that the BIOS had detected during the initial run, that will be displayed on the screen so you can take the corresponding action.

In case you have assembled your PC, there are a few things that you need to do in order to successfully re-boot the system. You need to check all of the main cables and completely turn off the power system. Make sure all external cables are disconnected from the system. You will find data cables such as the SATA PORTS inside the CPU case. Make sure that they, too, are disconnected before you begin attempting to repair the system. However, one thing that must stay connected is the Power switch and if you are not sure whether this is done properly, you can always consult the manual.

At this point, you must perform your first test boot. Re-connect all of the main cables for your computer and attempt to switch on the PSU. Then, press on the Power button located at the front panel of your computer. If your system is not properly restored after you have performed the above procedure and you reach this point, you might be experiencing a more serious problem with your PC. This would indicate that the problem could either be located on the motherboard, video card, RAM, or CPU.

Only at this stage should you consider having a professional or expert look into your system in troubleshooting your PC . This will prevent you more trouble in the future as you should leave the more serious troubleshooting jobs to those who are skilled at it.

Home » Noobs Guide To Troubleshooting Your PC

Leave a Reply