With LE Audio not working, the cause is usually a mismatch between four things: your phone’s software, your earbuds’ firmware, the earbuds’ companion app and the pairing record left over from classic Bluetooth. The quickest fix is to update both devices, forget the earbuds, pair them again and check the LE Audio toggle. If sound is still silent or mono, turn LE Audio off for that device and use classic Bluetooth.
This is a different problem from broadcast sharing. Our guide on whether your phone supports Auracast covers that. This one covers the everyday one-to-one connection that is supposed to just work and sometimes doesn’t. We haven’t tested any of these earbuds. Everything below comes from maker support pages and dated owner posts, and each is labeled.
What LE Audio Changes, and Why It Breaks
LE Audio is the newer Bluetooth audio standard. It uses the LC3 codec instead of classic codecs like SBC, AAC or aptX. Avantree, a seller of Bluetooth adapters, says compatibility “depends on hardware chips, firmware versions, phone software, companion apps, and sometimes even regional updates.” It also warns that users may still fall back to classic Bluetooth audio, and that a Bluetooth 5.2, 5.3 or 5.4 label doesn’t prove LE Audio support (Avantree blog, June 30, 2025).
That is the root of most LE Audio not working reports below. Some phones, earbuds and apps support LE Audio, but they have to agree on it, and an update on either side can change the result.
LE Audio Not Working: Match Your Symptom
| What you see | Where owners report it | First thing to try |
|---|---|---|
| The LE Audio toggle is gone | Galaxy S25 Ultra after One UI 8 (Sept 2025) | Fix 1, then Fix 3 |
| “Connected” but silent or choppy | Galaxy S23 after One UI 6 (Nov 2023) | Fix 3, then Fix 4 |
| Mono sound or stuck on LC3 | Soundpeats Air4 Pro thread (Mar 2024) | Fix 4 |
| Microphone fails on calls | EarFun Air Pro 4 on a Pixel (Nov 2024) | Fix 4, Fix 5 |
| Only one earbud connects | Sony support article (2026) | Fix 2 |
| Drops out, then silent after the case | EarFun Air Pro 3 on a Pixel 7 (2023) | Fix 2, Fix 4 |
Screenshot this table before you start changing settings.
Fix 1: Confirm You Actually Have LE Audio
Check the requirements for your exact model. Jabra’s release note for the Elite 10 Gen 2 (version 2.4.4, May 27, 2025) says LE Audio needs Android 15 or higher, lists specific Pixel and Galaxy phones, says it must be enabled in the phone’s settings, and states “As of this release, iOS does not support LE Audio.”
Sony’s help guide for the LinkBuds Fit says both the phone and the headset must support LE Audio. It also says to confirm that “LE Audio” appears under the headset’s name in the Sound Connect app and that the toggle is on in the phone’s Bluetooth settings for that device (Sony help guide).
On Android, that toggle usually sits behind the gear icon next to the connected earbuds. One Galaxy S25 Ultra owner wrote in September 2025 that after updating to One UI 8 and Android 16, the toggle disappeared and audio defaulted to Samsung’s own codec with Galaxy Buds 2 Pro and Buds 3 Pro. A reply asked whether the setting lived in developer options, and the thread shows no confirmed answer. If your LE Audio toggle is missing, the earbuds, the phone software and the app are the three things to check, in that order.
Fix 2: Forget the Earbuds and Pair Again
Both Jabra and Sony tell you to remove the old pairing. Jabra says to delete the existing pairing and re-pair after the update if you want LE Audio. Sony’s support article (2026) says that if only one earbud connects after switching between Classic Audio and LE Audio, forget the earbuds in your phone’s Bluetooth settings and pair them again.
A Sony WF-1000XM5 owner who wrote up the process in October 2024 also cleared the Sound Connect app’s storage and restarted the phone, and factory-reset the earbuds when they still wouldn’t pair. That is one person’s route, not Sony’s instruction.
Fix 3: Update Everything, Then Check the Order
Avantree’s checklist is to update the phone software, the headphone firmware and any transmitter firmware, then check the maker’s compatibility page.
Updates can fix a problem and also cause one, so read recent owner posts for your model first. Our Auracast guide shows one case where a firmware update was followed by failures. That is our suggestion, not advice from any maker.
One Galaxy S23 owner thread from November 2023 describes Creative Zen Hybrid Pro headphones that showed as connected over LE Audio but produced no usable sound after One UI 6. A poster said in January 2024 that updating the headphones’ firmware through Creative’s app, using a different phone, brought the sound back. Samsung and Creative didn’t confirm it in the thread.
Fix 4: Turn LE Audio Off for That Device
If LE Audio is still not working properly, turn it off. In the Android Central thread about Soundpeats Air4 Pro earbuds (March 2024), a helper suggested switching off Broadcast and the “LE Audio – Media and calls” option. The poster tried that, reset the earbuds, forgot all devices and even bought a second pair, and still got mono LC3. That thread shows no working fix.
On EarFun’s forum, an Air Pro 3 owner on a Pixel 7 reported dropouts on LC3 and silence after taking the earbuds out of the case. EarFun’s staff reply said its engineers found the phone was disconnecting the audio link and that it could only be solved by updating the phone’s LE Audio protocols. That is the maker’s statement, not something we verified.
The trade-off is that Auracast is built on LE Audio, so expect to lose it as well. That is our inference.
Fix 5: Go Back to Classic Bluetooth on Purpose
Some makers give you a switch. Sony’s guide tells you to reconnect over Classic Audio, then choose “Classic Audio only (conventional connection method)” in the Sound Connect app. Sony also notes that some headset functions aren’t available while connected over LE Audio.
You may not lose much. Avantree lists classic Bluetooth latency as typically 100–200 ms and says LE Audio can be “potentially much lower.” That’s a vendor claim, and the gain depends on the whole chain. If your goal is to fix video lag, see our guide on earbuds out of sync with video.
If calls are the problem, see why earbuds sound bad on calls. One EarFun Air Pro 4 owner on a Pixel 8 Pro reported in November 2024 that the microphone stopped working on calls once LE Audio was on, while a pair of Soundpeats Air Pro 4 worked well with LC3 on the same phone. The EarFun thread was never resolved.
If You Haven’t Bought Yet
LE Audio support is still uneven, so check before you buy and avoid LE Audio not working surprises:
- Look for the words “LE Audio” and “LC3,” not just a Bluetooth version.
- Open the maker’s compatibility page and find your exact phone model.
- Check the operating system. Jabra said iOS didn’t support LE Audio as of May 2025, and a Spanish-language guide published October 29, 2026 says Apple’s help pages don’t mention LE Audio or Auracast.
- Make sure the earbuds still work well in classic mode, because that’s what you may end up using.
👉 Browse earbuds that list LE Audio | Browse USB-C Bluetooth LE Audio adapters
Frequently Asked Questions
Why is LE Audio not working on my earbuds? Usually the phone, earbuds, firmware and companion app aren’t all set up for it, or the old classic pairing is still in place. Update both devices, forget the earbuds, pair them again and check the LE Audio toggle in the device’s Bluetooth settings.
How do I turn off LE Audio? On many Android phones, open Bluetooth settings, tap the gear next to the earbuds and switch off LE Audio. Some earbuds also have a setting in their app, such as Sony’s “Classic Audio only” option.
Does LE Audio work on iPhone? Jabra stated in a May 2025 release note that iOS did not support LE Audio at that release. A guide published in October 2026 says Apple’s help pages don’t mention it. Check Apple’s pages for the latest.
Is LE Audio the same as Auracast? No. LE Audio is the new Bluetooth audio standard. Auracast is its broadcast feature, which lets one source send to many listeners. A device can support one without the other.
Is LE Audio better than classic Bluetooth? It can be, with lower delay and efficiency gains, according to vendors. In practice it depends on your phone, earbuds and firmware, and several owners in the threads above were left with LE Audio not working until they turned it off.
As an Amazon Associate, Jegec earns from qualifying purchases. This post contains affiliate links, and if you buy through them, we may earn a small commission at no extra cost to you.
Sources: Avantree — Which Bluetooth LE Audio Headphones Are Compatible Today? | Jabra — Elite 10 Gen 2 release notes | Sony — Pairing and connecting with an Android smartphone using LE Audio (LinkBuds Fit) | Sony — After switching between Classic Audio and LE Audio, my smartphone only connects to one earbud | Samsung Community — Unable to stream audio using LC3 on Galaxy S25 Ultra | Samsung Community — One UI 6 Bluetooth LC3 not working, S23 series | Android Central Forums — Soundpeats Air4 Pro LC3 thread | EarFun Community — LC3 on Air Pro 4 with Pixel 9 | EarFun Community — Unstable connectivity on LC3 with Pixel 7 and Air Pro 3 | Engineered.at — Enabling LE Audio/LC3 in WF-1000XM5 | Whatsnew — Bluetooth LE Audio y Auracast